Volvo S60 Twin Engine 2020, Owner'S Manual

Page: 143 / 687

DISPLAYS AND VOICE CONTROL
}}
141
Protecting a driver profile
It may not always be desirable to store set-
tings made in the vehicle to the active driver
profile. In these instances, the driver profile
can be protected.
NOTE
Protecting a driver profile is only possible
when the vehicle is stationary.
To protect a driver profile:
1. Tap Settings in the Top view in the center
display.
2. Tap System Driver Profiles .
3. Select Edit Profile .
> A menu will open in which the driver
profile can be changed.
4. Tap Protect Profile to protect the profile.
5. Confirm your selection to protect the pro-
file by tapping Back / Close .
> When the profile is protected, settings
made in the vehicle will not be auto-
matically stored to the profile. The
changes must instead be saved man-
ually under
Settings System
Driver Profiles Edit Profile by tap-
ping Save current settings to the
profile . If the profile is not protected,
the settings will be automatically stored
to the profile.
Related information
•
Driver profiles (p. 139)
Linking a remote key to a driver
profile
A remote key can be linked to a driver profile.
This driver profile and all of its settings will
then automatically be selected every time the
vehicle is used with that particular remote
key.
The first time the remote key is used, it is not
linked to any specific driver profile. The
Guest
profile is automatically activated when the
ignition is switched on.
A driver profile can also be selected manually
without linking it to any key. When the vehicle
is unlocked, the last active driver profile will be
activated. If the key has ever been linked to a
driver profile, it is not necessary to manually
select a driver profile when using that particu-
lar key.
Linking a remote key to a specific
driver profile
NOTE
A remote key can only be connected to a
driver profile when the vehicle is stationary.
First select the profile you would like to link to
the key (if that profile is not already active).