2001 Volvo S & V 40
Scan
Press "SCAN" for a longer period to connect the scan function. The unit plays the first 10 seconds of
each track. "SCAN" is displayed as long as the function is activated.
pg. 141 AUM (Advanced User Mode)
AUM (Advanced User Mode)
●
With the radio switched off, press and hold the volume wheel down for at least 5 seconds to start the
AUM function.
●
Turn the 1-20/DISC knob to choose an AUM function (see function list on the right).
●
When the function has been chosen, the function's default position flashes. Press the 1-20/DISC knob
to choose an alternative (e.g. ON/OFF, LOW/MID/HIGH, etc., depending on the function).
●
Continue to choose function/alternative.
To reset all AUM functions to factory settings, turn the 1-20/DISC knob until "SET TO DEFAULT" is
shown in the display, and then press the same knob. All AUM settings are reset to default position and
the radio reverts to normal status (music, news, etc.).
To save any changes and revert to normal position, turn the 1-20/DISC knob until "BACK and SAVE"
are shown in the display, and press the same knob.
To revert to normal position without saving the changes, turn the 1-20/DISC knob until "BACK without
SAVE" is shown in the display, and press the same knob.
AUM functions (starting position "default" is underscored)
- SET TO DEFAULT (See left-hand column).
- AF SWITCHING ON/OFF (automatic frequency update) - The AF function ensures that the strongest
available transmitter for a program is selected.
- REGIONAL ON/OFF (regional radio program) - This function makes it possible to continue to listen
to a regional transmitter, even if the signal is weak.
- EON (Enhanced Other Networks) LOCAL/DISTANT - This function determines whether the radio
program you are listening to is to be switched off before e.g. a traffic report or news broadcast (if these
functions are selected) only if the signal is strong (LOCAL) or whether the radio must also try to capture
file:///K|/ownersdocs/2001/2001_SV40/01sv40_10.htm (11 of 13)12/30/2006 3:49:30 PM
