Volvo S 90 2017, Owner'S Manual

Page: 124 / 570

||
INSTRUMENTS AND CONTROLS
122
Numbers
Numbers can be spoken in different ways
depending on the context and function being
used:
•
Phone numbers and zip codes
should be
spoken individually, number by number, e.g.,
five five five one two three four (5551234).
•
Addresses (house numbers)
can be spo-
ken individually or as a group, e.g., two two or
twenty-two (22). It is also possible to say a
sequence of numbers, e.g., twenty-two
twenty-two (22 22) and "double" or "triple"
can also be used, e.g., double zero (00) or tri-
ple zero (000). Numbers in the range
0-2300 can be used.
•
Frequencies
can be spoken ninety-eight
point eight (98.8), one hundred four point
two (104.2) or hundred four point two
(104.2).
Related information
•
Voice control (p. 120)
Voice control settings
There are a number of settings that can be made
for the voice control system.
Open the center display's Top view and tap
Settings System Voice Control
and
select settings.
•
Repeat Voice Command
•
Gender
•
Speech Rate
Sound settings
Open Top view and tap
Settings Sound
System Volumes Voice Control
.
Changing languages
The voice control system only understands the
languages marked by the
symbol in the list
of possible system languages.
Changing the language for this system also
affects menus, messages and help texts.
Open Top view and tap
Settings System
System Language
.
Related information
•
Voice control (p. 120)
•
Using voice commands (p. 121)
•
Navigation system voice commands (p. 125)
Voice control for cell phones
Voice commands can be used to control many
of the most common functions in a Bluetooth
®
-
connected cell phone.
To specify a phone book contact, the voice com-
mand has to include the contact's information
that is in the phone book. For example, if a con-
tact such as
John Smith
has several phone
numbers, a number category such as
home
or
mobile
can be specified. To call, say: "
Call John
Smith mobile
".
To use the voice control system, press the
on the right-side steering wheel keypad and say
one of the following commands after the tone:
•
"
Call [contact]
": call a contact from your
phone book.
•
"
Call [phone number]
": call a phone num-
ber.
•
"
Recent calls
": displays the list of recent
calls.
•
"
Read message
": reads a message aloud.
If there are several messages, select the one
to be read.
•
"
Message to [contact]
": The user will be
prompted to dictate a message. The mes-
sage will then be read aloud and the user
can opt to send or modify it.