Volvo 2016 XC 90 Twin Engine, Owner'S Manual, Page: 459 / 582

NAVIGATION
*
}}
* Option/accessory, for more information, see Introduction. 457
service sources and GPS data from the vehicle.
When a vehicle requests information about the
flow of traffic, anonymous data about the traffic
situation in the vicinity of the vehicle is provided,
which helps enable RTTI to function. This data is
only transmitted if RTTI is activated.
Current traffic information is shown for highways/
freeways, major roads, secondary roads and in
some cases for urban routes.
The amount of traffic information shown on the
map depends on the distance from the vehicle,
but not farther than approx. 65 miles (100 km)
from the vehicle's current location.
Text and symbols on the map are displayed in the
usual way and the traffic flow shows how fast
traffic is moving on a given road compared to the
posted speed limit. Traffic information is shown in
both directions on a road with a colored line in
each direction:
•
Green: traffic flowing smoothly.
•
Yellow: slow-moving traffic.
•
Red: traffic tie-up/accident.
NOTE
Traffic information is not available in all
areas/states/provinces.
The transmission range for traffic information
is being increased continuously.
Activating/deactivating
The vehicle must be connected to the Internet in
order to use RTTI.
1. Tap
Settings
in the center display's Top
view.
2. Tap
Navigation Traffic
and select a set-
ting for connected traffic information:
Use
RTTI when an internet connection is
available
/
Use online traffic information
.
•
Check the box: RTTI is activated and
replaces the normal traffic information
function.
•
Deselect the box: RTTI will be deactivated
and the normal traffic information function
will be activated.
If the vehicle's Internet connection is lost while
RTTI is activated, the normal traffic information
will activate automatically. If the Internet connec-
tion is re-established, RTTI will reactivate.
Related information
•
Connecting to the Internet (p. 410)
•
Traffic information (p. 456)
Navigation in the instrument panel
An activated route will automatically be displayed
in the instrument panel.