Volvo 2016 s60 inscription, Owner'S Manual

Page: 107 / 344

03 Instruments and controls
03
*
Option/accessory, for more information, see Introduction.
105
Trip computer – Trip statistics
Trip information from previous trips regarding
average fuel consumption and average speed
is stored and can be displayed in the form of
a bar chart.
Function
Trip statistics 23
Each bar represents a driving distance of
1 mile or 10 miles, depending on the current
scale; the bar at the far right shows the value
for the current mile/10 miles.
Use
TUNE
to change between 1 mile and
10 miles; the marker at the right will also
change according to the scale selected.
Settings
Settings can be made in the MY CAR menu
system as follows:
•
Start new trip : press ENTER to erase all
pervious statistics. Exit the menu by
pressing EXIT .
•
Reset for every driving cycle
: select by
pressing ENTER . Exit the menu by press-
ing EXIT .
Selecting
Reset for every driving cycle
era-
ses all trip statistics automatically if the igni-
tion is switched off for at least 4 hours. When
the engine is restarted, new statistics will be
stored.
To get new statistics if the engine is restarted
before 4 hours have elapsed, the existing
ones have to be erased manually by selecting
Start new trip
.
For additional information, see Information
display – menu controls (p. 96).
See also the information about Eco Guide in
Eco Guide* and Power Meter* (p. 61).
Related information
•
Trip computer – introduction (p. 98)
•
Trip computer – functions, analog instru-
ment panel (p. 99)
•
Trip computer – functions, digital instru-
ment panel (p. 102)
•
Trip computer – Supplementary informa-
tion (p. 104)
23 The illustration is generic; certain details may vary from model to model