manualshive.com logo in svg

Volvo Penta V6-240, Operator'S Manual

Share
Download
Volvo Penta V6-240 Operator'S Manual Download Page 16

Volvo Penta Dealer Network

The Volvo Penta worldwide network of authorized
dealers is at your service. Volvo Penta strongly rec-
ommends that you take your product to an authorized
Volvo Penta dealer for service or repair. They are spe-
cialists in Volvo Penta products and have the acces-
sories, genuine Volvo Penta parts, test equipment, and
tools necessary for high quality service and repair
work.

Dealer Locator Services

If you are away from home and need service or main-
tenance on your engine and drive, take your product
to the nearest Volvo Penta servicing dealer. For the
name and location of the nearest Volvo Penta dealers,
use the 

Find a Dealer

 feature on the Volvo Penta web

site (see below).

Customers in the US can also call toll free;
1.800.522.1959.

Volvo Penta on the Internet

www.volvopenta.com

Whether you’re trying to replace a lost operator’s man-
ual, searching for updated service information about
your engine, looking for parts information, or simply
attempting to locate the nearest authorized Volvo
Penta dealer, Volvo Penta on the Internet is the web
site to visit. Additionally, you will find a wealth of infor-
mation related to our company and all the new and
innovative products we have to offer.

Customer Relations

For customers in the United States.

The Volvo Penta Customer Relations Department may
be contacted at the following address;

Volvo Penta of the Americas
attn: Customer Relations
1300 Volvo Penta Drive
Chesapeake, Virginia 23320, USA

You may also call;
Phone: 866.273.2539

P0016522

 

P0019994

 

Introduction

14

47706354 08-2015  © AB VOLVO PENTA

Summary of Contents for V6-240

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands