Menus
The system has four menus:
•
Main Page
•
Monitoring Page
•
Settings Page
•
History Page
Main Page
Browse with the Page button (
1
) to the main menu
(Main).
Browse between windows using the up/down buttons.
Monitoring Page
1 Browse with the Page button (
1
) to the engine data
menu (Monitoring page).
2 Browse in the engine data menu with the up/down
buttons.
Settings Page
The review and changing of setpoints is carried out in
the Settings page.
1 Browse with the Page button (
1
) to the Settings
page.
2 Browse between the different setpoints using the
up/down buttons.
3 Press Enter (
2
) to confirm the selection.
4 Browse with the up/down buttons to the desired
setpoint. Setpoints marked with an asterisk (*) are
password protected.
Press Enter to confirm the selection.
5 Use the up/down buttons to adjust the setpoint.
Depress the up/down buttons for 2 seconds to
activate automatic repetition.
6 Press Enter (
2
) to confirm the selection. To finish
without any change press the Page button (
1
).
Press the Page button (
1
) to select setpoint group.
History Page
1 Browse to the History page using the Page button
(
1
).
2 Browse with the up/down buttons to the desired
event.
3 Press Enter (
2
) to see more detailed information
about the event. Continue to press Enter to see all
information about the event.
When all information is shown the first image is
visible again. Browse in the window using the up/
down buttons.
4 Exit the menu with the Page button (
1
) .
Instruments and Controls
47711740 05-2019 © AB VOLVO PENTA
23
Summary of Contents for D16
Page 1: ...Operator s manual D16 genset ...
Page 86: ......
Page 88: ......
Page 90: ...AB Volvo Penta SE 405 08 Göteborg Sweden www volvopenta com 47711740 English 05 2019 ...
