UP
C O N T E N T S
Package Contains:
•
1 Volterman Cardholder
•
Set of 3 Magnetic Charging Cables
•
(Micro USB, C-Type, iOS)
•
1 wallet Charging Cable
•
1 yellow Security Card
•
Warranty Card
•
User Guide
•
Certificate of Authenticity
S E T T I N G
1
- Download the Volterman app to your
smart device and register your account. Use
the confirmation code sent to your email to
complete your registration.
2
- Charge your Cardholder using the supplied
charging cable. Your wallet will display a red
light whilst charging and a green light once
fully charged. You can also charge it wirelessly
by placing the the Cardholder face-down on a QI wireless charger.
3
- Press the Alarm Button until the green start-up light comes on. Your wallet will now run
through its start-up sequence. This typically takes 20 to 30 seconds.
4
- Scan the yellow Security Card’s QR Code to connect your device.
Please Note
For data security, your Cardholder can only be connected to one account at a time.
T H E A P P L I C A T I O
The app home screen contains six main features, Flight Mode and
Settings Menu buttons.
P O W E R B A N K
The built-in Power Bank allows you to charge the Cardholder
both with a cable or wirelessly.
To see the battery level of your Cardholder, press the Power Bank
icon on the Home Screen. This screen will also show you when your
device is charging.
You receive a notification when the Power Bank level is below 15%.
C H A R G I N G
To charge your device using a cable, connect the
compatible cable via the bottom of the Cardholder,
connect the other end to your device and turn on
the Power Bank by sliding the Power Bank toggle in
the app to the right or by double-pressing the Alarm
Button on the Cardholder.
To charge a QI compatible device wirelessly, turn on
the Power Bank as described above and place your
device on the ‘back’ of the Cardholder (the side with
the Volterman Logo. If properly aligned, your device
should start charging after a few seconds.
Please Note
•
QI charging is significantly slower than conventional cable charging.
•
Always turn the Power Bank
off when you are not charging a
device as QI technology emits a
regular signal which can cause a
significant reduction in battery life.
•
Only use the provided cables.
•
Do not use your Volterman cables
to charge other devices.
•
We recommend that you enable
the app’s ‘Airplane Mode’ when
charging your wallet.
•
Simultaneously charging your Cardholder with a cable and wirelessly is not
recommended.
•
Simultaneously charging two devices via cable and wirelessly is not recommended.
•
Likewise, charging a device via the Cardholder whilst charging the Cardholder at the
same time is not recommended.
•
Do not charge your Cardholder using a power supply greater than 5V 2A
T R A C K M Y W A L L E T
By pressing the button, the Track My Wallet function allows you to see your
Cardholder’s location using GPS. From the tracking screen you can:
•
Track your Cardholder in
real time.
•
Get directions to your
Cardholder.
Please Note:
•
The GPS location may
not be accurate when the
Cardholder is in an enclosed
location. However, the
device automatically tags
its location on an hourly
basis and these last tagged
locations can be viewed
from inside the app.
M E M O R Y B A N K
Your Cardholder contains a 64GB memory and
can be used to store all regular files.
To access your files, press the Memory Bank
icon where you will be advised to connect to the
Volterman Wi-Fi (navigation to your phone’s Wi-Fi
screen is dependent on your Operating System and
phone).
The default password is -
12345678
Once connected, navigate back to the Volterman
app. You will now have access to your Memory Bank
and any files that are contained within. You can also
add, rename and delete folders and files in much the
same way as any other File Manager.
Please Note:
•
Connection to the Volterman Wi-Fi IS NOT an
internet connection but a direct link between
your device and your Volterman wallet using
Wi-Fi protocol. This is a standard data-transfer
technique used by many high-end devices and
is much faster than Bluetooth. You will not have
internet access at this time.
•
A small amount of your 64GB is taken up with
necessary system files that enable your OS to
communicate with the Memory Bank.
D I S T A N C E A L A R M
The Distance Alarm will ring whenever your wallet is out of
range (approximately 20M/65ft). To activate the Distance
Alarm, turn your phone’s Bluetooth on and ensure that your Cardholder
is connected. Slide the toggle under the Alarm Icon to the right. If
Bluetooth connection is lost, your wallet and phone will ring and vibrate.
Your phone will display a pop-up with a button that can turn the alarm
off. You can also turn off the alarm by single clicking the Cardholder’s
Alarm Button.
You can manually activate the Cardholder’s alarm by pressing the
Camera
LED Light
RFID Pockets
Speaker Proximity Sensor Alarm Button
Magnetic Charging Port
VISIT OUR WEBSITE
®
Y O U N E V E R L O S E
www.volterman.com
CARDHOLDER USER GUIDE
N
