33
17. CaLL SaVed meaSured data
To call saved data records in the corresponding operating mode (P = pressure, V = flow speed, F = volume flow), push the button
“P/V/F”.
Push and hold the “Avg/Rec” button for 2 seconds to display saved data records. The last data record saved appears in the display
first.
Push the buttons “Unit ” or “Unit ”, to browse the saved data records.
Push “Avg/Rec” to have the average value of all saved measured values displayed in the selected operating mode.
To leave the saving mode again, keep “Avg/Rec” pushed for 2 seconds again.
18. deLete Stored meaSured VaLueS
To delete individual saved data records in the corresponding operating mode (P = pressure, V = flow speed, F = volume flow), push
the button “P/V/F”.
Push and hold the “Avg/Rec” button for 2 seconds to display saved data records. The last data record saved appears on the display
first.
Push the buttons “Unit ” or “Unit ”, to browse the saved data and select the desired data record.
Push “SAVE/CLEAR” to delete the selected data record. This reduces the displayed number of saved data records at the bottom
right of the display.
To leave the saving mode again, keep “Avg/Rec” pushed again for 2 seconds.
To delete all data records, proceed as described in chapter 9
“Change Setup Setting”
item 9.9
“delete memory”
.
Summary of Contents for 101719
Page 3: ...3 16 15 14 3 4 2 6 17 18 19 20 21 5 7 8 9 11 10 13 12 1...
Page 71: ...71...
Page 72: ...72...
Page 73: ...73...
