You will need the following tools:
Phillips screwdriver or battery
powered screwdriver and a cutting tool
(set drill at
low
torque setting)
1
Installation Guide - NiMH to Lithium
Need Help? Contact Us at (732) 967-9888 EXT: 230
Upgrading the Water Tech
TM
Volt FX-8Li Motor Box
Your new kit includes:
Motor Box with ON/OFF Button (P30X003LI)
Charger (LC099-3S-US-EU)
There are two sizes of screws used in
the Water Tech
TM
VOLT FX-8Li. While
disassembling the machine, make note of
which screw is used where.
STEP 1:
Place the unit on a workbench
with the ON/OFF knob facing up.
You must replace the motor box and
charger when repairing the unit
Why did the motor box kit come with a charger?
This complete kit replaces all of the electronics for the
Water Tech
TM
Volt unit and will guarantee that your machine
will be repaired and increase the longevity of your battery.
No cover needed
