background image

High Power Countertop Induction Ranges with Temperature Control Probe Operator’s Manual

EDIT THE DEFAULT PROGRAMS (CONTINUED)

Transfer Programs to the Induction Range

1. Plug in the induction range. Do NOT turn on the range. 

2. Only the Vollrath logo on the control panel should be illuminated. 

3. Insert the USB flash drive into the induction range. The USB flash 

drive can be left in the range for storage. Close the USB port cover. 

4. When the programs have transferred, the display will show 

5. Press .

6. The new programs are now available for use.

CLEANING

To maintain the appearance and increase the service life, clean 
induction range daily. 

NOTICE: Do not use abrasive materials, scratching cleansers or 

scouring pads to clean the equipment. These can damage 
the finish. 

1. Touch 

 to turn off the range. 

The display may show HOT until the cooking surface cools. 

2. Unplug the cord from the wall outlet. 

3. Allow the equipment to cool.

4. Wipe the exterior with a clean damp cloth.

5. Thoroughly wipe off any soap residue. 

NOTICE: Soap residue could corrode the surface of the unit.

Clean the USB and Temperature Control Probe 
Ports (As needed)

The USB and temperature control probe port covers should always be 
in place when not in use to prevent food debris from entering the ports. 
However, if food debris does enter the ports, they can be cleaned.

1. Turn off and unplug the induction range.
2. Use a cotton swab dipped into isopropyl alcohol to gently remove 

the debris.

3. Allow the port(s) to air dry before placing the cap over the port(s).

WARNING

Electrical Shock Hazard

Do not spray water or cleaning products. Liquid could contact 
the electrical components and cause a short circuit or an 
electrical shock. 

CAUTION

Burn Hazard

Heating surface remains hot after equipment is turned off. Hot 
surfaces and food can burn skin. Allow the hot surfaces to cool 
before handling. 

Summary of Contents for HPI4-2600













Reviews: