-1-
-2-
-3-
Quick Installation Guide
NGF-762E
1. Overview
2. Package Checklist
4. DIP Switches
Front Panel View
Fiber Port
SFP Type Media Converter
LED Indicators Copper Port
Fiber Port LED Indicators Copper Port
Rear Panel View with DIP Switches
Converter with 1x9 SC and RJ45 connectors
Converter with SFP and RJ45 connectors
The NGF-762E Converter is used to connect devices
with 10/100/1000Base-T cable to fiber-based Ethernet.
The NGF-762E is enhanced with Link Fault Signaling,
Loop-back Testing and SFP dual speed setting.
5. Location
The NGF-762E can be placed on a desktop or horizontal
surface, it can be wall-mounted.
Step1: The wall-mount direction can be straight or
horizontal.
Step2: Please this device by using mounting holes on
the wall at the appropriate place.
3. Hardware Installation Procedure
STEP 1: Remove from packaging and connect the 12V
DC adapter to the power input on rear panel.
STEP 2: Connect the Ethernet (RJ-45) port to the
networking device. See the LNK/ACT LED to
confirm if the connection is established.
STEP 3: Connect the fiber cable to the fiber port.
STEP 4: See DIP switches on rear panel to enable/
disable the required features per application
Before installing the NGF-762E, verify that the package
contains the following items:
1 x NGF-762E Converter
Power adapter (Check for area type)
Quick Installation Guide
10/100/1000
100/1000
Fiber RJ45
ALM
1000
LNK/
ACT
1000
TX
10/100/1000
Fiber RJ45
ALM
LNK/ACT
1000
RX
1
2
3
4
5
6
7
LFS
LLB
RLB
100FX
RSV
RSV
RSV
DIP Key
12VDC
1 2 3 4 5 6 7
PWR
ON
OFF
1x9 Type Media Converter
1
2
3
4
5
6
7
LFS
LLB
RLB
RSV
RSV
RSV
RSV
DIP Key
12VDC
1 2 3 4 5 6 7
PWR
ON
OFF
1. LFS
ON : Link fault signal function is enabled
OFF: Link fault signal function is disabled. (Default)
2. LLB
ON : Local loopback function is enabled
OFF: Local loopback function is disabled. (Default)
3.RLB
ON : Remote loopback function is enabled
OFF: Remote loopback function is disabled. (Default)
4.100FX
This is function is only for SFP type media converter
ON : When install the 100FX SFP transceiver,
please set this DIP to ON.
OFF: When install the 1000Base-X SFP transceiver,
please set this DIP to OFF. (Default)
5~7 RSV The DIP means Reserve. The default is in OFF position.
Moun
�
ng holes for
device
Moun
�
ng holes drawing of device
50mm
50mm
1.5mm~3mm
Screw installa
�
on Distance
