-1-
-2-
-3-
Quick Installation Guide
1. Overview
2. Package Checklist
5. Cabling RJ45
3. Hardware Installation Procedure
STEP 1:
Take out the device from its packing
STEP 2:
Attach the DIN rail kit as shown in picture
IMC-563 is an Unmanaged Industrial Mini-Media
Converter which is designed to expand reliable Ethernet
connectivity to Industrial applications. IMC-563 is
equipped with 1 100/1000 Base-T port and 1 100FX/
100Base-X SFP slot. With IP30 protection it exhibits
extreme tolerance in harsh temperature environment
ranging from -40°C to 75°C. IMC-563 quickly installation
with no software or additional configuration needed,
proves to be a perfect solution for industrial applications.
IMC-563 includes automatic MDI/MDI-X on the RJ45
port.
IMC-563 is shipped with the following items*. If any of
these are missing or damaged, please contact your
customer service representative for assistance.
IMC-563 Device
DIN rail kit
Quick Installation Guide
* Contents of the package can be adjusted based on
customer demand.
STEP 3:
STEP 4:
Connect the Ethernet (RJ45) port to the media converter.
See the L/A (Link/Activity) LED to confirm if the connection
is established
DIN-Rail-mounted with IMC-563
The RJ45 port on the IMC-563 supports auto negotiation
and auto MDI/MDI-X. This feature eliminates the worry
of using specific cable types.
Note: Category 5e cable or above should be used.
IMC-563
Removing the Switch
Mounting the Switch
Safety first
!
Turn the power off before connecting modules or wires.
The correct power supply voltage is listed on the
product label. Check the voltage of your power source
to make sure that you are using the correct voltage. Do
NOT use a voltage greater than what is specified on the
product label.
Calculate the maximum possible current in each
power wire and common wire. Observe all electrical
codes dictating the maximum current allowable for
each wire size. If current go above the maximum
ratings, the wiring could overheat, causing serious
damage to your equipment.
Note: Please MUST turn off the power before unplug/plug
DC Jack or Terminal block connector
Connect 12VDC adapter or 12~57VDC input to terminal
block of the IMC-563
. Please note the "+" & "-" symbols before connecting
terminal block.
12~57VDC
-
+
STEP 5:
Insert the SFP module and connect the fiber cable to the
fiber port
4. Location
The IMC-563 can be DIN-Rail-mounted in the cabinet or
enclosure.
PWR
L/A
100
12~57VDC
100/1000
100/1000
1000
Panel view
-
+
12~57VDC
