41.VW.2210.3102_BA_V00_EN
VAS 681 003A
27
EN | Operation
Warm start
You can carry out a warm start of the high-voltage DC charger when the charger is switched
off but connected to the power supply.
Press and hold the “On” button.
The message “
Switching on
” and a progress bar appear on the LC display.
Press and hold the “On” button until the progress bar reaches 100%.
The high-voltage DC charger starts the self-test.
Setting the contrast
In order to see the information on the LC display better, you can adjust the contrast to suit
the ambient conditions.
This chapter explains how to adjust the contrast of the LC display.
Requirement:
•
The DC charger must be switched on (see the “Cold start” and “Warm start” chapters).
In the main menu, open the “
Configuration parameters
” submenu by pressing function
key F1.
Navigate to the “
Contrast
” parameter by pressing function keys F2 (down) and F3 (up).
Select the “
Contrast
” parameter to edit by pressing function key F4 (select).
