Volkswagen Transporter 2016, Workshop Manual

Page: 27 / 73

2.12 Removing and installing auxiliary heater
control unit - J364-
The auxiliary heater control unit - J364- is an integral part of the
combustion air blower - V6- and cannot be renewed individually
⇒ Electronic parts catalogue (ETKA) .
2.13 Removing and installing combustion air
blower - V6-
Removing
Dismantling and assembling heater unit
⇒ page 20 .
Installing
Install in reverse order of removal.
2.14 Connector pin assignment for auxiliary/supplementary heater
1 - 6-pin connector
❑ Information on pin as‐
signment can be found
in the latest current flow
diagram ⇒ Current flow
diagrams, Electrical
fault finding and Fitting
locations.
2 - 2-pin connector
❑ Information on pin as‐
signment can be found
in the latest current flow
diagram ⇒ Current flow
diagrams, Electrical
fault finding and Fitting
locations.
3 - 2-pin connector
❑ Information on pin as‐
signment can be found
in the latest current flow
diagram ⇒ Current flow
diagrams, Electrical
fault finding and Fitting
locations.
4 - 4-pin connector
❑ Information on pin as‐
signment can be found
in the latest current flow
diagram ⇒ Current flow
diagrams, Electrical
fault finding and Fitting
locations.
5 - 2-pin connector
❑ Information on pin as‐
signment can be found
in the latest current flow
diagram ⇒ Current flow diagrams, Electrical fault finding and Fitting locations.
Transporter 2016 ➤
Auxiliary heater - Edition 04.2020
2. Auxiliary/supplementary heater
23