Operating the speed limiter
Please refer to at the start of the chap-
Fig. 102 Lefthand side of the multifunction
steering wheel.
Switching on
— Press the
button.
The system is not yet active.
Starting control
— While driving, press the
button.
The current speed is stored as the maximum
speed.
Setting the speed
You can adjust the stored speed:
Gently press the but-
ton.
Gently press the button.
Strongly press the
button or swipe over the button from
bottom to top. The first time it is ac-
tuated, it jumps to the next higher ten
(km/h) or five (mph) increment.
Strongly press the
button or swipe over the button from
top to bottom. The first time it is ac-
tuated, it jumps to the next lower ten
(km/h) or five (mph) increment.
Press and hold the corresponding button to
continuously change the stored speed.
+ 1 km/h (1 mph):
- 1 km/h (1 mph):
+ 10 km/h (5 mph):
- 10 km/h (5 mph):
Cancelling control
— Press the
button.
The speed remains stored in the memory.
Resuming control
— Press the
button.
The speed limiter is activated again as soon
as the current speed is lower than the stored
speed.
Switching off
— Press and hold the
button.
The speed limiter is switched off and the
speed is deleted.
Switch to other driver assist systems
Depending on the equipment, you can switch
to the following driver assist systems:
— Adaptive Cruise Control (ACC).
— Cruise control system
1.
Press the
button or swipe over the
button.
2.
Swipe to the left or right to select the
desired system.
3.
Press the
button.
Troubleshooting
Please refer to at the start of the chap-
Speed limiter not available.
The indicator lamp lights up yellow.
— Malfunction. Switch off the speed limiter
and go to a qualified workshop.
System control is interrupted automatically.
— You have switched off Electronic Stability
Control (ESC).
— The brakes have overheated. Allow the
brakes to cool down and check their func-
tionality again.
148
Driver assist systems
