Volkswagen Motorsport
Volkswagen Golf
GTI
TCR SEQ User Manual
Volkswagen Golf GTI TCR SEQ User Manual
Page 37
-
Maintain the wishbone regulation plate clean and little oiled between plates.
Camber
Toe regulation
Wishbone regulation
1,5 turns = 10’ camber
-5.8º
9,5 turns
12 turns
-5,5º
7 turns
8,3 turns
-5º
3,5 turns
4,5 turns
-4,5º
0
0
-4º
-3,5 turns
-4 turns
-3,8º
-6 turns
-7 turns
Notes:
-
Take care with the maximum and minimum camber. Although physically the camber adjuster can
reach higher values, it is not recommended due the drive shaft limitations.
4.6
Rear camber and toe adjustment
To reach the rear suspension set-up value is recommended to proceed
as following:
1.
Car ride height: put the ride height at your choice through
damper/spring adjustments.
2.
Camber: to change the camber is recommended to move the
“boomerang” arm.
3.
Toe: to change the toe enlarge or reduce the rear arm.
4.
Check: Adjust a second time if necessary.
Notes:
-
The rear camber regulation does not have relation with the toe movement, so it is possible to change
rear camber without any toe movement.
-
After the camber adjustment job, check that the ball-joint is placed in the middle of its housing.
Camber
Arm regulation
-2º
1,5 turns
-2,5º
1 turns
-3º
0,5 turns
-3,5º
0
-4º
-0,5 turns
-4,5º
-1 turns
-5º
-1,5 turns
