Volkswagen Composition Colour, Manual

Page: 22 / 55

CONFIDENTIAL
not for distribution
First read and observe the safety warnings on page 3 and the introductory information
on page 12.
Selecting stations
Selecting stations using arrow
buttons
<
/
>
Touch the
<
or
>
⇒
Fig. 10 function button.
The unit only switches to stored or receivable stations, depending on
what settings have been made for the arrow buttons. Setting for the ar-
row buttons in the
FM/AM setup menu
⇒
page 18.
Selecting stations from a station
list
Touch the

⇒
Fig. 10 function button to open the station list.
Search through the list and touch the required station to select it.
To close the station list, touch the

⇒
Fig. 11 function button.
Updating the station list
In the FM frequency band the station list is updated automatically.
In the AM frequency band, touch the

⇒
Fig. 11 function button to up-
date the station list.
Tuning to a station frequency manually
Displaying the frequency dial
Turn the setting knob one stop further .
OR : touch the

⇒
Fig. 10 function button.
Adjusting the frequency in
stages
Turn the setting knob.
OR : touch the arrow buttons to the left or the right of the frequency
band.
Quickly browsing through the
frequency band
Touch one of the arrow buttons at the top of the screen
⇒
Fig. 10 . The
next receivable station is set automatically.
OR : press and hold one of the arrow buttons at the top of the screen
⇒
Fig. 10 . When you release the button, the unit automatically tunes to
the next available station.
OR : place your finger on the slider in the frequency dial and drag it
along the dial.
Hiding the frequency band
Briefly press the setting knob.
Manual frequency selection is also closed if you select a station with a
station button. The frequency band closes automatically after a period
of inactivity.
Storing stations
Storing the current station to a
station button
Press and hold the desired station button
⇒
Fig. 10 until a tone is soun-
ded.
The station currently playing is then stored on that station button.
Storing a station from the station
list to a station button
Touch the

⇒
Fig. 10 function button to open the station list.
Stations already stored on a station button are marked in the station list
with the

⇒
Fig. 11 symbol.
Select the desired station by pressing and holding on the screen.
Touch the button to which you wish this station to be assigned.
A signal tone sounds, and the station is then stored on this station but-
ton. Repeat the process to store further stations from the station list.
Deleting stored stations
All stored stations can be deleted individually or together in the FM/AM
setup menu
⇒
page 18.


Audio mode 15
142.5R6.RCT
.20