Sound of Harmony
The maximum bear weight of this product is 5kg. Don’t place any item
more than 5kg on top of the speaker-table. The table is not intended to
be used as a seat, no matter if you're an adult or a child.
Please use the original A/C adapter for charging. Other adapters might
not work with Sound of Harmony, or in extreme cases cause accidents.
Thank you for choosing Vola!
We hope you like your Sound of Harmony as much as we do. The whole
Vola team wishes you lots of homey atmosphere with your new Vola!
Warning!
What’s in the box
Main body
3x legs
Power Cable
AC Power adapter
3x EVA PAD spare parts
(if required)
3,5mm AUX cable
Assembly steps
1. Open the box, and place the speaker on a flat surface with the screw
holes upwards.
2. Take a wood leg and insert it into one of the holes.
3. Rotate the wooden leg clockwise until properly fastened.
4. Repeat for remaining legs.
5. Turn the speaker around.
POWER ON:
Connect the power supply. You will hear a voice prompt, when the speaker
turns on.
BLUETOOTH:
Choose the device from the device’s bluetooth settings. When the speaker is
in pairing mode a blue light will be flashing. When connected the light will
always stay lit. The optimal distance between device and speaker is ≤10 m.
DISCONNECT BLUETOOTH:
Switch off the bluetooth connection from the device, or long press the
Play/Pause button
POWER OFF: Press the power button.
AUX CONNECTION:
By inserting a AUX cable into the AUX socket at the rear panel of the
speaker, the device will automatically switch to AUX mode, indicated by a
blue and green LED light. Bluetooth mode will be switched back on when
you remove the AUX cable.
Instructions
User Manual
