VoiceCollect GmbH
Page 7
Voice
Collect
®
Technical Manual
3
First Use
In most cases, installation and commissioning are handled by our customer service. Should this
for some exceptional reason not be possible, please perform the installation in close consulta-
tion with our customer service to avoid damages to the device.
3.1 Unpack
Please unpack carefully. Inspect the device for any transportation damage. We only accept
warranty for any damage which is claimed before putting the device into operation.
3.2 Select Location
Select a location that meets the following requirements:
enough space when installed in a cabinet
strong and safe foundations (table)
room temperature (5 … 40° C)
dry room (humidity max. 75%, not condensing)
adequate air flow around the device
installation of additional for rack mounting recommended
3.3 Installation of the IR44CF II
CAUTION
Risk of destruction
Wrong adjusted voltage on the power supply may damage your system.
Before connecting the power supply, check whether the available and the
required mains voltage are the same.
DANGER
Risk of electric shock!
Power carrying parts may be dangerous to persons if the IR44CF II is op-
erated without the housing or with incorrect mains connection.
- Do not operate IR44CF II without the housing.
- Establish the mains connection in accordance with national standards.
3.3.1 Steps to install the IR44CF II
Install the IR44CF II in a 19 inch installation frame or in a housing depending on the model.
Connect the power as described in the chapter
