Mecatronic solutions
VOH IV
Page 8
User guide
11.
Bring the digital display (9) to 0 using the knurling wheel for the carriage skip (10)
12.
Secure the pallet-stone by gently bringing the clamping roller (3) frontwards, until the stop. It is better
to do this by using both your hands.
The blocking force for the pallet-stone can be adjusted by screwing (
) or unscrewing (
) the adjustment
screw (11) located on the rear side of the mechanical block of the Echappemètre.
13.
Move the lifting in the wanted value by turning the knurling wheel of the carriage skip (10) The value of the
displacement value can be read on the digital display (9). It is advisable to go 2 - 3 µm beyond the desired
value and go back, in order to avoid the spring effect of the glue.
14.
Unlock the pallet-stone gently pushing the clamping roller (3) backwards.
15.
Open the chuck for the liftings with the excentered lever.
16.
Carefully remove the pallet-stone.
If, during handling, you drop your pallet-stone in within the Echappemètre VOH - IV, you can retrieve it by
removing the tray (16)
4 Representation/distribution
