Mecatronic solutions
VOH IV
Page 4
User guide
The operating temperature of the device exceeds 100°C, the burning hazard is real, and we exhort the operator
to great caution and recommend to never touching the device with bare hands when it is switched on.
Before any intervention, it is compulsory to switch off the device with the main switch (1) and to wait for 30
minutes until all is cooled down.
Attention !!!
Please read the information contained in this manual before using the device. An improper use may
damage the system, cause measurement errors.
Before connecting the device for the first time, make sure the power supply network matches the one
requested by the device.
In case of longer non-use of the device, disconnect the power cable.
Do not disassemble the unit. Only the manufacturer is entitled to replace or repair a faulty component.
Use this device to a temperature between 10° (50° F) and 40° C (104° F)
Caution : The device in your possession is a precision instrument, whose purpose is the moving of the liftings of
pallet-stones with an acuteness of about 1/1000 mm (µm). As such, this unit should be treated and handled with
the utmost care, and any operation must be performed by an authorised person and trained for this purpose.
1.3 Transport
This device is not intended for frequent transportation. If however it is necessary to shift it, mount the transport
handles and make sure not to cause shocks which might damage the mechanics of the device. Likewise, when
transported over a long distance, it is preferable to use a packaging protecting well from shocks.
1.4 Storage
The VOH IV- Prod must be stored in a dry place and protected from dust. The storage temperature should be
between 10° C (50° F) and 40° C (104° F). For an extended storage, it is advisable to protect the device from
dust and humidity.
2 Ownership of the device
Move in the lifting axis
Bidirectional correction
Accuracy of ± 1µm for the correction
Adjustable clamping force
Viewing with Leica binocular
