background image

3

SAFETY INSTRUCTIONS

This manual explains the proper installation and use of your cooker hood, please read it carefully 

before using even if you are familiar with the product. The manual should be kept in a safe place 

for future reference.

Never to do:

•  Do not try to use the cooker hood without the grease filters or if the filters are excessively greasy!

•  Do not install above a cooker with a high level grill.

•  Do not leave frying pans unattended during use because overheated fats or oils might catch fire.
•  Never leave naked flames under the Rangehood.

•  If the cooker hood is damaged, do not attempt to use.

•  Do not flambé under the cooker hood.

•  CAUTION: Accessible parts may become hot when used with cooking appliances.
•  The minimum distance between the supporting surface for the cooking vessels on the hob and 

  the lowest part of the cooker hood. (When the cooker hood is located above a gas appliance, this 

  distance shall be at least 65 cm)

•  The air must not be discharged into a flue that is used for exhausting fumes from appliances

 

  burning gas or other fuels.

Always to do:

•  Important! Always switch off the electricity supply at the mains during installation and 

 

  maintenance such as light bulb replacement.
•  The cooker hood must be installed in accordance with the installation instructions and all 

  measurements followed.

•  All installation work must be carried out by a competent person or qualified electrician.

•  Please dispose of the packing material carefully. Children are vulnerable to it.
•  Pay attention to the sharp edges inside the cooker hood especially during installation and 

 cleaning.
•  When the cooker hood is located above a gas appliance,the minimum distance between the 

  supporting surface for the cooking vessels on the hob and the lowest part of the cooker 

  hood that distance must be:
Gas cookers:  

75 cm

Electric cookers: 

 65 cm

Coal or oil cookers:   75 cm

•  Make sure the ducting has no bends sharper than 90 degrees as this will reduce the efficiency of 

 

  the cooker hood.

•  Warning: Failure to install the screws or fixing device in accordance with these instructions

 

  may result in electrical hazards

Summary of Contents for 330286













Reviews: