TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
a) Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction.
b) Sufficient air is needed for proper combustion and exhausting of gases
through the flue (chimney) to prevent back drafting.
c) When cutting or drilling into a wall or ceiling, do not damage electrical
wiring and other hidden utilities.
d) The rangehoods must always be vented to the outdoors.
•
Do not use this product outdoors.
•
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction,
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
•
There shall be adequate ventilation of the room when the range hood is
used at the same time as appliances burning gas or other fuels.
•
There is a fire risk if cleaning is not carried out in accordance with
instructions.
•
The exhaust air must not be discharged into a flue which is used for
exhausting fumes from appliances burning gas or other fuels.
STAINLESS STEEL BAFFLE FILTERS
The filters should be cleaned frequently. Use a warm detergent solution.
Grease filters are washable.
See “INSTALL FILTERS” section for removal and installation instructions.