vogel's SAVA 1001, User Manual

Page: 12 / 108

©
VOGEL’S
12
If the LED then starts to flash red/blue again, you can slide the
multifunctional switch back to the centre position for the optical
connection (OPT), or completely to the left for the analogue
connection (AUX).
The SAVA 1001 is now in pairing mode and all previously paired
devices have been deleted from its memory.
Continue with point 4.2.3 or point 4.3 to pair your Bluetooth
device.
6 Product details
6.1 Technical specifications
General specifications
DC Power 5V USB-A
Power Consumption < 0.2W
Bluetooth
Control Auto Pairing and connection
Connection up to two Bluetooth devices (BT 3.0 or
higher)
Supported Bluetooth profiles A2DP
Supported Codec SBC, AAC, aptX, aptX Low Latency
Supported Codec SBC, AAC, aptX, aptX Low Latency
(single-mode only)
No aptX or AAC support links with SBC
Audio Latency SBC, 170 ms - 270 ms
AAC, 90 ms - 150 ms
aptX, 60 ms -80 ms
aptX Low Latency, 32 ms - 40 ms
Support Multiple pair up to 8 devices
Support multiple connect (TX) Up to 2 devices simultaneously.
Electric Performance
– RF
Bluetooth version V4.1, class 2
Chip CSR
Range Up to 10 meters with Class 2> <2
connection
Up to 15 meters with Class 2> <1
connection
Input
Interface Audio Input Jack 3.5 mm stereo
Toslink Digital stereo