Congratulations on your purchase of this high quality product from Voda Plumbingware.
Please read the following before installation and retain (along with your receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 35kPa
Maximum operating Pressure = 500kPa* (As per NZ Building Code AS/NZ 3500.1)
Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
Mains Pressure systems Install the flow regulator as shown in the diagram below.
Unequal Low Systems Install as supplied.
Equal Low systems
Install as supplied.
CONTENTS
• Wall brackets
• Fixing kit
• Glide bar with adjuster/holder
• 1.5m shower hose
• Shower Supply Elbow
• Shower Handpiece
• Flow Regulator (for Mains Pressure installations)
INSTALLATION
*FOR PRESSURES EXCEEDING 500kPa INSTALL A PRESSURE REDUCING VALVE. THOROUGHLY FLUSH ALL
PIPES TO ELIMINATE ANY REMAINING DIRT AND RESIDUE, AND INSTALL INLINE FILTERS. FAILURE TO DO SO
MAY VOID THE WARRANTY.
ECLIPSE
1 Function Slide Shower
(Square)
VECL61S
Voda Plumbingware Limited | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
8L/min Flow Regulator
Black O-ring
Water Flow
Shower Elbow
(O-ring side)
Flow Regulator
Washer
Shower Hose
Mains Pressure installation only:
Insert the flow regulator with the O-ring
facing away from the hose (as shown),
between Shower Elbow and Hose. This will
comply with the WELS rating.
Do NOT fit between handpiece and hose as
this can overpressurise the hose and cause
premature failure of the shower hose.
