VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
57
☐
Place the batteries in the battery boxes and install the hold down clamps.
Ensure the ring terminals on the battery cables are adequately
insulated to prevent an electrical short.
Figure 82 — Installing the batteries
☐
Wrap the ring terminal end of the (×2) 2 AWG positive battery cables with tape
to prevent electrical shorts (Figure 82).
Figure 83 — Installing the batteries
☐
Apply dielectric grease to the battery terminals and connect the battery cables
to the battery (Figure 83, Table 2).
Battery cable legend
Front battery
Rear battery
Long 2 AWG negative cable
Long 2 AWG positive cable
Short 2 AWG positive cable
Short 2 AWG negative cable
Table 2 — Battery cable legend
