VMAC
–
Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289
Fax: 1-250-740-3201
6
Part 2: Installing the Tank
The tank will mount on the passenger side of the vehicle between
the two cab mounts.
Figure 2.1
2.1 Assembling and Installing the Brackets
□
Place the tank on a workbench with the front (oil filter end) of the
tank to your left and remove the oil filter.
□
Remove the two 1/4 inch pinch bolts from the C-clamps. Expand
the clamps slightly and slide them over the front of the tank.
□
Position the front clamp right behind the weld on the filter end of
the tank and the rear clamp approximately 18 inches from the
front weld.
□
Place the two formed tank strap mounts under the C-clamps with
the ends with threaded holes facing you.
