VMAC
–
Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289
Fax: 1-250-740-3201
28
Part 5: Finishing the Installation
5.1 Before Starting the Engine Checklist
Make sure that the following have been completed:
□
Check the coolant.
□
Check the compressor oil level at the tank sight glass.
□
Do a final inspection to make sure that everything has been
completed and tightened.
□
Perform a final belt alignment check.
□
Check all wiring for security and protection. Make sure nothing is
touching the compressor body.
5.2 After Starting the Engine Checklist
Place the truck in a safe operating position and block
the wheels. Ensure that there are no people around the
truck before beginning the test.
Make sure that the following have been completed:
5.2.1 Automatic Transmission Trucks
□
Ensure all compressor outlet valves are closed.
□
With the engine running, engage the park brake; place your foot
firmly on the brake pedal.
□
Start the compressor and let the truck ramp up to 1800 rpm and
then drop down to 1000 rpm. Shift the truck into gear. The
engine should go to idle.
□
Repeat this test in all gear selector positions to make sure that
the engine does not idle up unless the selector is in Park or
Neutral.
!
