2.0 Installation Requirements
The information in this section is very important for
proper operation of the compressor. Read these
requirements before beginning installation.
Before installing the compressor, examine the possible locations and
consider the following factors when selecting a location:
•
it is convenient for making electrical, hydraulic and air
connections and does not require extensive plumbing
•
hose and wire lengths will be the shortest possible and a
minimum number of 90 degree fittings will be used
•
the oil level at the sight glass can be checked easily
•
there will be sufficient clearance around the unit for good air
circulation and effective cooling
•
it can be serviced easily without having to disconnect lines or
remove and reposition the unit
•
it will be protected from excessive exposure to the elements
and possible incidental damage from other operations
•
it is away from heat sources such as engines, exhaust
systems or other components that generate heat
•
it is not in a location where it will be exposed to high
contamination levels, including combustible gases
•
The PREDATAIR60 requires higher hydraulic flow and
pressure than a typical 30-40 CFM system. Check pump,
hose and connection ratings and requirements.
The PREDATAIR is designed to sufficiently cool the
compressor and hydraulic oil for its own use only.
Additional hydraulic oil cooling is required if other
hydraulic equipment is being used on the same circuit.
2.1 Air Receiver Requirements
A reservoir tank is recommended, particularly for
systems using the two-speed function.
The PREDATAIR uses an unloader system which minimizes fuel
burn, equipment wear, cooling load, enclosure temperature,
hydraulic temperature and noise, when compressed air is not being
used. For this unloader system to work most efficiently, and to avoid
having the compressor loading and unloading too frequently, some
air receiver volume is very beneficial.
VMAC – Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289 Local: 1-250-740-3200
Fax: 1-250-740-3201
6
