VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
54
Inspecting and Replacing the Air Filter
Read the “Maintenance and Repair Safety” section prior to
performing any work on the system (beginning on page 47).
Wear appropriate Personal Protective Equipment and follow all
industry standard safety practices.
☐
Clean loose debris from the area around the compressor and the filter cover to
prevent contaminants entering the compressor.
☐
Remove the filter cover retainer knob, the air filter cover and the air filter
element.
☐
Immediately cover the compressor opening with tape or with a clean cloth to
prevent contamination. Do not use compressed air or perform any other tasks
around the compressor until the filter and cover have been replaced.
☐
Clean the inside of the filter cover with a clean, dry cloth. Do not use flammable
solvents to clean the inside of the cover.
☐
Remove the cloth or tape covering the inlet and install a new air filter. Ensure
the filter fits over the “step” on the filter plate.
☐
Replace the cover and secure it with the filter cover retainer knob. Do not
overtighten.
Filter plate
“step”
Figure 30 — Compressor air filter and cover
(PTFE lines removed for clarity)
