Vmac G300003, Installation, Owners And Service Manual, Page: 52 / 100

VMAC
– Vehicle Mounted Air Compressors
VMAC Technical Support: 1-888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
50

Check the oil level at the sight glass on the front of the WHASP Tank.
Continue adding oil until the level is correct.

Reinstall the fill cap.

Start the engine and check for oil leaks.

Allow the system to build to pressure (factory setting 150 psi) and for the
engine speed to decrease to base idle.

Turn off the engine.

Once the system has sat for 5 minutes, check the oil level through the
sight glass. The level must be between the
“MIN” and “MAX” level
indicators.

Verify there are no oil leaks.