VLT MCD 500, Operating Instructions Manual, Page: 64 / 81

7-13 Adaptive Start Profile-2
Option: Function:
Selects which profile the MCD 500 will
use for an AAC adaptive acceleration
control soft start.
Early Acceleration
Constant Acceleration
*
Late Acceleration
7-14 Adaptive Stop Profile-2
Option: Function:
Selects which profile the MCD 500 will
use for an AAC adaptive acceleration
control soft stop.
Early Deceleration
Constant Deceleration
*
Late Acceleration
7-15 Brake Torque-2
Range: Function:
20%
*
[20 - 100%] Sets the amount of brake torque the MCD
500 will use to slow the motor.
7-16 Brake Time-2
Range: Function:
1 sec
*
[1 - 30 secs] Sets the duration for DC injection during a
braking stop.
NOTE
This parameter is used in conjunction
with
7-11 Stop Time-2 .
7.11 Display
8-1 Language
Option: Function:
Selects which language the LCP will
use to display messages and feedback.
English
*
Chinese (
中丈
)
Spanish (Español)
German (Deutsch)
Portuguese (Português)
French (Français)
Italian (Italiano)
Russian (
Русский
)
7.11.1 User Programmable Screen
Selects which four items will be displayed on the
programmable monitoring screen.
8-2 User Screen - Top Left
Option: Function:
Selects the item displayed in the top left part
of the screen.
Blank Displays no data in the selected area,
allowing long messages to be shown without
overlapping.
Starter State The starter's operating state (starting,
running, stopping or tripped). Only available
for “Top L” and “Btm L”.
Motor Current The average current measured on three
phases.
Motor pf
*
The motor's power factor, measured by the
soft starter.
Mains Frequency The average frequency measured on three
phases.
Motor kW The motor's running power in kilowatts.
Motor HP The motor's running power in horsepower.
Motor Temp The motor's temperature, calculated by the
thermal model.
kWh The number of kilowatt hours the motor has
run via the soft starter.
Hours Run The number of hours the motor has run via
the soft starter.
8-3 User Screen - Top Right
Option: Function:
Selects the item displayed in the top right
part of the screen.
Blank
*
Displays no data in the selected area,
allowing long messages to be shown without
overlapping.
Starter State The starter's operating state (starting,
running, stopping or tripped). Only available
for “Top L” and “Btm L”.
Motor Current The average current measured on three
phases.
Motor pf The motor's power factor, measured by the
soft starter.
Mains Frequency The average frequency measured on three
phases.
Motor kW The motor's running power in kilowatts.
Motor HP The motor's running power in horsepower.
Motor Temp The motor's temperature, calculated by the
thermal model.
kWh The number of kilowatt hours the motor has
run via the soft starter.
Hours Run The number of hours the motor has run via
the soft starter.
Programming MCD 500 Operating Instruction
MG17K402 - VLT
®
is a registered Danfoss trademark 63
7 7