Insert the Battery Pack
in the Inside Cover using
one (1) flathead M4x12 hex
screw. After the screw is fully
tightened, loosen the screw
by one full turn.
9. PC Board
Plug the Lock Motor cable into
the Inside Cover PC board.
10. Inside Cover
Place the Inside Cover on the
Mounting Plate and fully tighten
the battery pack screw loosened
in step 8. Use one (1) M3x10 pan
head screw to secure the Inside
Cover to the Mounting Plate.
Make sure the wires do not get pinched
when attaching the cover.
