V3-204
VIVREAU BOTTLING SYSTEM
COMMISSIONING INSTRUCTIONS
Confirm that the proper services are available. The water
supply
must be a ½” water line with
a ½”
threaded ball valve female end. Anything smaller than ½” is not acceptable and should
never
be
used. The electrical outlet must be within the range of the power cord of the
machine,
extension
cords should never be used. CO2 is also provided by the customer in
either a tank
or with a line
from a bulk or remote system. If connecting to an existing system
the
customer must provide a ¼”
barbed shutoff within 40” of the installation.
If any of the required services are missing/incorrect or if you have any questions regarding
the commissioning instructions, please call 877-999-1044 option #5, and someone from our
Tech Support Team will provide further instructions.
Open equipment packaging and inspect for damage. Make sure the legs are level, adjust if
necessary. If anything is damaged or missing call the Vivreau service number and report the
missing or damaged parts.
Locate the installation instructions and checklist, confirm all parts are included using the
installation parts diagram included with the paperwork.
Make the connections at the customer water supply, check valve and filter head, but do not
connect to the back of the machine yet. The filter head can be mounted on a wall or onto
the
back
of the machine.
Remove the rear water bath access plug. Place the drip tray upside down on the counter to
prop
up the front legs. Slowly fill the water bath using the water supply line. Once full level
the machine
and replace the plug.
Connect the water supply to the back of the machine and secure with a red clip.
Connect the CO2 tank or the customer supplied CO2 line to the provided CO2 regulator and
set
pressure as per instructions. If connecting to bulk CO2 or an existing system make sure
the
customer has provided the CO2 line with the ¼” barbed shutoff. The general setting for
CO2 is
between 65 and
7
0 PSI. Connect the regulator to the rear of the machine and secure
with a red
clip.
B
ot
tl
in
g S
yst
em
C
om
m
issi
oni
ng I
nst
ruct
ions
vivreauwater.com
Tel: 877-999-1044 (Option #5 for Tech Support)
