Vivotek TN9441 User Manual Download

Page: 59 / 197

VIVOTEK - Built with Reliability

User's Manual - 59

3-5. Settings

Click the Settings button to start the camera and system settings window. A

confirm box will prompt. Enter User name and Password to proceed.

The system will default to the overview page displaying the camera connection and

storage statuses. An empty position will be left in blank, and a disconnected camera will
be indicated as

. The storage volume usage is displayed as the used and unused

spaces.

The

Stop Buzzer

Reboot

, and

Power-down

buttons are also available on this page.

There are critical conditions that can sound the system buzzer, such as a disk failure.

3-5-1. Settings - Overview

Summary of Contents for TN9441






































































































































































































Search results

Summary of Contents for TN9441

Reviews:

Related manuals for TN9441

Brands by name

Popular brands

Vivotek TN9441, User Manual

Search results

Summary of Contents for TN9441

Reviews:

Related manuals for TN9441

Brands by name

Popular brands