VIVOTEK - A Leading Provider of Multimedia Communication Solutions
32 - User's Manual
Trigger
This page allows Administrator to configure the Network Video Recorder to react in response
to particular event triggers� A typical reaction is that when a motion is detected by the network
camera, the Network Video Recorder sends buffered images to a FTP server or e-mail address
as notifications. You can configure up to 16 event triggers.
In the following illustration, an event can be triggered by many sources, such as motion
detection or external alarm (digital input devices). When an event is triggered, you can specify
what kind of action should be performed� You can assign the Network Video Recorder to send
snapshots (�jpg) or �txt document to your e-mail address or FTP site�
■ Please configure the following items to please follow the steps below to add a new event trigger:
ex. Camera Disconnected,
Motion detection on/off,
Alarm on/off (Digital input)...
Event Trigger
ex. Snapshot or .txt file
ex. Email, FTP
Media
(what to send)
Server
(where to send)
ex. Turn on/off Relay
(Digital output)
NR7401
(what to do)
Action
(what to do)
Summary of Contents for NR7401
Page 1: ......
