Vivotek IP9165-LPC User Manual Download

Page: 144 / 367

VIVOTEK

144 - User's Manual

Local storage > SD card management

SD card format

The Linux kernel EXT4 file system format applies to SD card larger than 32GB. However, if EXT4 is

applied, the computers running Windows will not be able to access the contents on the SD card unless

using some 3rd-party software.

This section explains how to manage the local storage on the Network Camera. Here you can
view SD card status, and implement SD card control.

SD card staus

This column shows the status and reserved space of your SD card. Please remember to format the SD

card when using for the first time.

no SD card

NOTE:

•

It is recommended to turn OFF the recording activity before you remove an SD card from the

camera.

•

The lifespan of an SD card is limited. Regular replacement of the SD card can be necessary.

• Camera filesystem takes up several megabytes of memory space. The storage space cannot

be used for recording.

•

Using an SD card that already contains data recorded by another device should not be used

in this camera.

•

Please do not modify or change the folder names in the SD card. That may result in camera

malfunctions.

Summary of Contents for IP9165-LPC
















































































































































































































































































































































































Search results

Summary of Contents for IP9165-LPC

Reviews:

Related manuals for IP9165-LPC

Brands by name

Popular brands

Vivotek IP9165-LPC, User Manual

Search results

Summary of Contents for IP9165-LPC

Reviews:

Related manuals for IP9165-LPC

Brands by name

Popular brands