19
<type>relay</type>
</dout>
<dout index="4">
<label>Output 5</label>
<type>openc</type>
</dout>
<dout index="5">
<label>Output 6</label>
<type>openc</type>
</dout>
<dout index="6">
<label>Output 7</label>
<type>openc</type>
</dout>
<dout index="7">
<label>Output 8</label>
<type>openc</type>
</dout>
<dout index="8">
<label>Buzzer</label>
<type>buzz</type>
</dout>
</all_configs>
<current_config>
<anain>
<option>0</option>
</anain>
<anatemp>
<option>0</option>
</anatemp>
<digtrh>
<option>1</option>
</digtrh>
</current_config>
</response>
6.5
Current status
The device status may be obtained by getting the file
iostatus.xml
from IO.XEC. The location of
the file is:
http://<address>/protect/status.xml
The value of each digital input is concatenated in the field “in” of the above file. The same
operation is done with the outputs, in the field “out”. In this case, the status of the buzzer is
also concatenated, as if it were the 9
th
output.
The fields marked with “-- “ are inactive.
Example:
<response>
<in>00000000</in>
Summary of Contents for IO.XEC
Page 1: ...USER S MANUAL IO XEC ...
