background image

 

 

VIVOTEK

 

42 - User's Manual

MP4 Saving Options

Users can record live video as they are watching it by clicking 

 

Start MP4 Recording on the main 

page. Here, you can specify the storage destination and file name.

Folder: Specify a storage destination on your PC for the recorded video files. The location can be 

changed. 

File name prefix: Enter the text that will be appended to the front of the video file name. A specified folder 

will be automatically created on your local hard disk. 

Add date and time suffix to the file name

: Select this option to append the date and time to the end of the 

file name.

Local Streaming Buffer Time

In the case of encountering unsteady bandwidth, live streaming may lag and video streaming may not be 

very smoothly. If you enable this option, the live streaming will be stored temporarily on your PC’s cache 

memory for a few milli seconds before being played on the live viewing window. This will help you see 

the streaming more smoothly. If you enter 3,000 Millisecond, the streaming will delay for 3 seconds.

CLIP_

20190321-180853

Date and time suffix

The format is: YYYYMMDD_HHMMSS

File name prefix

Two way audio

Half duplex: Audio is transmitted from one direction at a time, e.g., from a PC holding a web console with 

the camera. 

Full duplex: Audio is transmitted in both directions simultaneously. 

Summary of Contents for IB9365-EHT-A











































































































































































































































































































































































































































Reviews: