VIVOTEK
User's Manual - 47
Media > Image
This section explains how to configure the image settings of the Network Camera. It is
composed of the following five columns: General settings, Image settings, Exposure,
Focus, and Privacy mask.
General settings
Video title
Show_timestamp_and video_title_in_video_and_snapshots
: Enter a name that will be displayed on
the title bar of the live video as the picture shown below.
Video Title
2013/02/09 17:08:56
Title and Time
Video 17:08:56 2013/02/09
Position of timestamp and video title on image
: Select to display time stamp and video title on the
top or at the bottom of the video stream.
Timestamp and video title font size
: Select the font size for the time stamp and title.
Color
: Select to display color or black/white video streams.
Position of timestamp and video title on image
: Select to display time stamp and video title on the
top or at the bottom of the video stream.
Timestamp and video title font size
: Select the font size for the time stamp and title.
Power line frequency
: Set the power line frequency consistent with local utility settings to eliminate
image flickering associated with fluorescent lights. Note that after the power line frequency is
changed, you must disconnect and reconnect the power cord of the Network Camera in order for
the new setting to take effect.
