Vivotek FD8155EHV User Manual Download

Page: 119 / 222

VIVOTEK

User's Manual - 119

Recording > Recording settings

This section explains how to configure the recording settings for the Network Camera.

Recording Settings

NOTE

► Please remember to format your SD card when using it for the first time. Please refer to page 124 for

detailed information.

Insert your SD card and click here to test

Recording Settings

Click

Add

to open the recording setting window. On this page, you can define the adaptive recording,

recording source, recording schedule, and recording capacity. A total of 2 recording settings can be

configured.

■ Recording name: Enter a name for the recording setting.

■ Enable this recording: Select this option to enable video recording.

■ With adaptive recording:

Select this option will activate the frame rate control according to alarm trigger.

The frame control means that when there is a triggered alarm, the frame rate will raise up to the value

you’ve set on Video quality page. Please refer to page 58 for more information.

NOTE:

Summary of Contents for FD8155EHV































































































































































































































Search results

Summary of Contents for FD8155EHV

Reviews:

Related manuals for FD8155EHV

Brands by name

Popular brands

Vivotek FD8155EHV, User Manual

Search results

Summary of Contents for FD8155EHV

Reviews:

Related manuals for FD8155EHV

Brands by name

Popular brands