Vivotek CC9380-HV User Manual Download

Page: 76 / 375

VIVOTEK

76 - User's Manual

Media > Audio

Audio Settings

Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note

that if muted, no audio data will be transmitted even if audio transmission is enabled on the Client

Settings page. In that case, the following message is displayed:

Microphone source: Select to stream the audio from the internal microphone or the external

microphone.

Microphone input gain: Select the gain of the audio input according to ambient conditions. Adjust

the gain between 100% and 0%.

Audio type: Select audio codec and the sampling bit rate .

■ G.711 also provides good sound quality and requires about 64Kbps. Select pcmu (μ-Law) or

pcma (A-Law) mode.

■ G.726 is a speech codec standard covering voice transmission at rates of 16, 24, 32, and 40kbit/

When completed with the settings on this page, click

Save

to enable the settings.

Summary of Contents for CC9380-HV
























































































































































































































































































































































































Search results

Summary of Contents for CC9380-HV

Reviews:

Related manuals for CC9380-HV

Brands by name

Popular brands

Vivotek CC9380-HV, User Manual

Search results

Summary of Contents for CC9380-HV

Reviews:

Related manuals for CC9380-HV

Brands by name

Popular brands