User Manual rev. 1.2. Aug. 2015
269
4-13.2 VLAN Port
The function Port Status gathers the information of all VLAN status and reports it by the order
of Static NAS MVRP MVP Voice VLAN MSTP GVRP Combined.
Web Interface
To
Displa
y VLAN Port Status in the web interface:
1. Click Monitor, VLAN Port Status.
2. Specify the Static NAS MVRP MVP Voice VLAN MSTP GVRP Combined.
3. Display Port Status information.
Figure 4-13.2: The VLAN Port Status for Static user
Parameter description:
VLAN USER
VLAN User module uses services of the VLAN management functionality to configure VLAN
memberships and VLAN port configuration such as PVID, UVID. Currently we support
following VLAN User types:
CLI/Web/SNMP :
These are referred to as static.
NAS :
NAS provides port-based authentication, which involves communications between a
Supplicant, Authenticator, and an Authentication Server.
Voice VLAN:
Voice VLAN is a VLAN configured specially for voice traffic typically originating
from IP phones.
MVR:
MVR is used to eliminate the need to duplicate multicast traffic for subscribers in each
VLAN. Multicast traffic for all channels is sent only on a single (multicast) VLAN.
MSTP:
The 802.1s Multiple Spanning Tree protocol (MSTP) uses VLANs to create multiple
spanning trees in a network, which significantly improves network resource utilization while
maintaining a loop-free environment.
Port :
The logical port for the settings contained in the same row.
Port Type :
Shows the Port Type. Port type can be any of Unaware, C-port, S-port, Custom S-port.
Summary of Contents for AW-GEV-264A Series
