User Manual rev. 1.2. Aug. 2015
250
4-9.1.2 Group Information
After you complete to set the IGMP Snooping function then you could let the switch to display
the IGMP Snooping Group Information. Entries in the IGMP Group Table are shown on this
page. The IGMP Group Table is sorted first by VLAN ID, and then by group. The will use the
last entry of the currently displayed table as a basis for the next lookup. When the end is
reached the text "No more entries" is shown in the displayed table. Use the button to start over.
Web Interface
To display the IGMP Snooping Group Information in the web interface:
1. Click Monitor, IGMP Snooping, Group Information
2. If you want to auto-
refresh the information then you need to evoke the “Auto-refresh”.
3.
Click “Refresh“ to refresh a entry of the IGMP Snooping Groups Information.
4.
Click “<< or >> “ to move to previous or next entry.
Figure 4-9.1.2: The IGMP Snooping Groups Information.
Parameter description:
Navigating the IGMP Group Table
Each page shows up to 99 entries from the IGMP Group table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20
entries from the beginning of the IGMP Group Table.
", and "group" input fields allow the user to select the starting point in the
IGMP Group Table. Clicking the button will update the displayed table starting from that or the
closest next IGMP Group Table match. In addition, the two input fields will - upon a button click
- assume the value of the first displayed entry, allowing for continuous refresh with the same
start address.
The will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table. Use the button to
start over.
IGMP Group Table Columns
VLAN ID :
VLAN ID of the group.
Groups :
Group address of the group displayed.
Port Members :
Ports under this group.
Summary of Contents for AW-GEV-264A Series
