User Manual rev. 1.2. Aug. 2015
244
4-7 Loop Protection
This section displays the loop protection port status the ports of the currently selected switch.
Web Interface
To display the
Loop Protection status in the web interface:
1. Click Monitor, Loop Protection
2. If you want to auto-
refresh the information then you need to evoke the “Auto refresh”.
3.
Click “ Refresh“ to refresh the LACP Statistics.
Figure 4-7: Loop Protection Status
Parameter description:
Port
The switch port number of the logical port.
Action
The currently configured port action.
Transmit
The currently configured port transmit mode.
Loops
The number of loops detected on this port.
Status
The current loop protection status of the port.
Loop
Whether a loop is currently detected on the port.
Time of Last Loop
The time of the last loop event detected.
Buttons
Refresh:
Click to refresh the page immediately.
Auto-refresh:
Check this box to enable an automatic refresh of the page at
regular intervals.
Summary of Contents for AW-GEV-264A Series
