100m
100m
AW-FED-0500
PoE switch
100m
Uplink
100m
100m
100m
Line2
C1
C2
C3
R1
R2
AP-FXC-0250
AP-FXC-0250
POWER
Green ON
Power link is connected from the PoE source.
Green OFF
Power is off.
PoE IN
Green ON
PoE IN port is connected.
Fast blinking
Data is being transmitted or received.
OFF
No connection.
OUT#
Green ON
Port is linked to a powered device.
OFF
No device is connected.
1. Install the device in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the extender are not blocked.
3. Use CAT5 or 6 UTP/STP cables. Avoid using low-quality cables, which will seriously limit the cabling distance.
AP-FXC-0150 and AP-FXC-0250 PoE Extender
Quick Installation Guide
The AP-FXC-0250 is a PoE extender capable of feeding 15.4/30W power to powered devices for a distance of up to 300
meters. Multiple extenders can be cascaded to increase the cabling distance and the number of powered devices.
IMPORTANT
:
INTRODUCTION
LED DEFINITIONS
CONNECTION
•
1x PoE extender
•
1x Quick Installation Guide
PACKAGE CONTENTS
Following are the conditions for making the cabling:
1. Use 18~19Ω, 24AWG CAT5 cables.
2. Typical VIVOTEK cameras stream size feature = 1080p@30fps - 6Mbps; 720p@30fps - 3Mbps.
Make sure the combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch.
3. The transaction on the PoE extender consumes 2W of power. Therefore, on Line2, the total power requirement is:
C1*+C2+C3+R1**+R2+(5W***x5).
If every camera consumes 5W, the total consumption is 44W.
* Cn = camera consumption,
** Rn = extender consumption, 2W.
*** A typical 100 meters connection induces a 5W power loss due to resistance.
AP-FXC-0250
Part no.: 625029100G
AP-FXC-0250_QIG,v1.0_20150120.indd 1
2015/1/27 下午 04:41:59
