Vivotek AP-FEX-0150-T, Quick Installation Manual

Page: 1 / 4

DC input
AP-FEX-0105-R
AP-FEX-0150-T
Network switch
RG6 100m~2.4km
AA-420
AT-BSP-001
(op ti onal)
AP-FEX-0250-T
1. Use CAT5e or CAT6 UTP/STP cables and RG6 coaxial cables.
2. Please avoid using low quality cables, which will seriously limit the cabling distance and power delivery.
3. Make sure the power source is sufficient for your configuration.
AP-FEX-0150-T
AP-FEX-0250-T EPoC Module
Model Description
AP-FEX-0150-T EPoC Outdoor Tx Module, 1x BNC, 1x FE RJ45, -30ºC~60ºC, IP67, IK10
AP-FEX-0250-T EPoC Outdoor Tx Module, 1x BNC, 2x FE RJ45, -30ºC~60ºC, IP67, IK10
IMPORTANT :
INTRODUCTION
CONNECTION
PACKAGE CONTENTS
Quick Installation Guide
AP-FEX-0100-R
AP-FEX-0150-T
Network switch
AP-FEX-0100-R
AP-FEX-0150-T
UPoE switch
RG6 100m~2.4km
RG6 100m~2.4km
PoE input
UPoE Injector
AT-BSP-001
(op ti onal)
AT-BSP-001
(op ti onal)
AP-FEX-0250-T
100m 100m 100m 100m
Network switch
AP-FEX-0150-T
Coaxial Cable
Ethernet Cable
Power Cable
AP-FEX-0105-R
AP-FEX-0100-R
AP-FEX-0150-T AP-FEX-0150-T AP-FEX-0150-T
Daisy Chain
DC
PoE
* 1x AP-FEX-0150/0250 EPoC module * 1x Quick Installation Guide
Rev.: 1.1