background image

 

 

VIVOTEK

 

User's Manual - 121  

Add server

It is necessary to configure the server and media settings so that the Network Camera will know what 

action to take (such as which server to send the media files to) when a trigger is activated. Click 

Add 

server

 to open the server setting window. You can specify where the notification messages are sent to 

when a trigger is activated. A total of 5 server settings can be configured.

There are four choices of server types available: Email, FTP, HTTP, and Network storage. 

Select the item 

to display the detailed configuration options. You can configure either one or all of them.   

Server type - Email

Select to send the media files via email when a trigger is activated.

■ Server name: Enter a name for the server setting. 

■ Sender email address: Enter the email address of the sender.

■ Recipient email address: Enter the email address of the recipient.

■ Server address: Enter the domain name or IP address of the email server.

■ User name: Enter the user name of the email account if necessary.

■ Password: Enter the password of the email account if necessary.

■ Server port: The default mail server port is set to 25. You can also manually set another port.

If your SMTP server requires a secure connection (SSL), select 

This server requires a secure 

connection (SSL).

Summary of Contents for 4712123678542


















































































































































































































































































































































































Reviews: