ViVOpay 8100 User Guide
20
Troubleshooting and Maintenance
LED Test
This test asks you to verify that all of the LEDs are working correctly. The results will be displayed
on the LCD.
1. Press
5
on the
ViVOpay AR Diagnostics
screen. The
LED Test
screen is displayed.
2. Press
ENTER
if all four LEDs flash on and off in sequence otherwise, press
CANCEL
to
indicate that the LEDs did not flash. The ViVOpay AR Diagnostics screen appears.
Tone Test
This test asks you to verify that the buzzer is audible. The results will be displayed on the LCD.
1. Press
6
on the
ViVOpay AR Diagnostics
screen. The
Tone Test
screen is displayed.
2. Listen for the tones and make sure they ramp up and then down.
3. Press
ENTER
if you hear the tones otherwise press
CANCEL
to indicate that the tones
did not ramp up and down.
Magstripe Test
This test asks you to swipe a magstripe card through the slot at the top of the ViVOpay 8100 and
displays the tracks read correctly. The results will be displayed on the LCD.
LED
Test
Press Enter if all 4 LEDs are
turned On and OFF, press X
if not
Tone
Test
Press Enter if you hear tones
ramp up then down, press X if
not
